Stop Logs & Pentock
Mechasol Can Provide Complete Solution for
Every Project from Design to Finishing Installation
for All Mechanical Works Requirements
Stop Log:
stop logs are used for closing channels temporarily for performing maintenance work on pumps, valves or building sections. They are also used for flood protection. Stainless Steel Stop Logs are mainly used in structures where the removal, installation, and replacement of the logs are expected frequently.
• Suitable for flows in either direction
• A pressure-sensitive intermediate lip seal design for effective inter-log sealing
• Extensive combination of wall and channel mounting configurations available
• All logs are supplied with lifting pins
The Channel Penstock
The channel penstock is intended to be embedded in concrete to ensure the water is not obstructed as it flows through the channel. Thus, when the channel penstock is open, it allows the liquid to flow freely which prevents the build up of waste inside.
Wall Penstock
Wall penstock is designed to be assembled onto a concrete wall using expansion or chemical anchors. It is two-way, allowing the liquid to move in both directions and sealed on all four sides to prevent leaks. It is suitable for use with clean liquids or those with solid content from waste water treatment plants, irrigation farming, pipes, etc.
Guillotine Sluice Gate
Guillotine Sluice Gate is designed to work with liquids in open channels. It is sealed on three sides (bottom and the two sides) to prevent leaks. It is suitable for use with clean liquids or those with solid content from waste water treatment plants, irrigation farming, water treatment, pipes,etc.
The Guillotine Sluice Gate is intended to be installed on a concrete wall, plugging the hole in the channel. The water level may be adjusted by 0 – 0.5 metres
Sluice Swing Gat
Sluice Swing Gate is designed to workwith liquids in open channels. It is sealed on thebottom and the two sides (three sides) to preventleaks. It is suitable for use with clean liquids or those with solid content from waste water treatment plants, irrigation installations, pipes, treatment plants, etc.
The Sluice Swing Gate is intended to be installed on a concrete wall, plugging the hole in the channel.
The water level may be adjusted by 0 – 0.3 metres.
LAYFLAT GATES
Gate range incorporates downwards opening tilt gates for accurate regulation and isolation of flows.
FEATURES :
• The design includes a gate leaf that is hinged across the bottom and actuated via a cable hoist mechanism.
• Single bay and multi-bay designs available.
• The modular design allows for the actuation system to be self contained or separately mounted.
• Accurate overshot flow and level control.
• Integrated emergency bulkhead guides.
• Suits structure openings of all sizes and are custom sized to suit their required application.